The WiFi module is installed into the back of the Trio in-home display. It enables the Trio to connect to the homes WiFi network.
To install, disconnect the Trio from the power supply. Remove the blank cover (which is the same size as the WiFi module pictured above) located on the back of the device using a small flat screwdriver.
After removing the cover, clip in the WiFi module by putting in the left side in first.
To see if you already have a WiFi modules installed go to the Main menu> Settings and look for a menu called WiFi network. If you have this menu then your trio IHD already has WiFi.
*Please note, the WiFi Module is only compatible with the Trio Touchbutton device*